Cathode aluminum plate

What is the manufacturer of cathode plates? 1070 cathode plates

1070 aluminum plateIt is a material used to manufacture structural components with specific properties, characterized by high plasticity, corrosion resistance, good conductivity, and thermal conductivity.

Material name: 1070 pure aluminum

1070 aluminum plate has the characteristics of high plasticity, corrosion resistance, good conductivity and thermal conductivity, but its strength is low, it is not strengthened through heat treatment, and its cutting ability is poor. It can accept contact welding or gas welding. Make more use of its advantages to manufacture structural components with specific performance, such as aluminum foil gaskets and capacitors, electronic tube isolation nets, protective covers for wires and cables, nets, wire cores, and aircraft ventilation system parts and decorative components.

Copper Cu: 0.04

Manganese Mn: 0.03

Magnesium Mg: 0.03

Zinc Zn: 0.04

Titanium Ti: 0.03

Vanadium V: 0.05

Aluminum Al: 99.7

mechanical property

Conditional yield strength σ 0.2 (MPa) ≥ 35

Sample size: All wall thicknesses

Note: Transverse mechanical properties of the board at room temperature

Heat treatment process

Perform oil quenching and tempering. The strength of this type of steel wire is not as good as that of lead bath treated steel wire, but its performance is uniform and consistent, and its cost is lower. After cold rolling, perform stress relief treatment. Pull to the specified size and then perform annealing treatment. After softening, the cold rolled form requires quenching and medium temperature tempering to obtain the required mechanical properties.