Cleaning process and oil stain removal method for aluminum discs

Aluminum waferThe cleaning process and methods for removing oil stains.

Method for removing oil stains on aluminum discs

1、 In order to reduce the sliding friction force of the digital control blade and material, it is required to use some emulsified oil. After the production and processing of aluminum circular plates, the remaining clean oil on the top cannot be easily wiped away, which requires special degreasing agents to remove. Common methods include immersion degreasing and self spraying degreasing.

2、 Self spraying oil removal and ash removal: 1. Add appropriate water to dilute the oil removal agent and ash removal agent separately; 2. Adjust the perspective of the nozzle properly; 3. Ensure the self spraying time of aluminum alloy profile handicrafts (many less than 30 seconds); 4. Ensure that the aluminum discs have a circulation system for hand washing.

3、 Immersion, oil removal, and ash removal: 1. Add a small amount of drinking water before use, and then infiltrate the aluminum wafer machined parts into the pool; (Adjust the ash remover properly); 2. Participated in aluminum wafer degreasing agent, fully automatic scalding within 5-10 seconds; 3. After 2-3 minutes of oil removal, clean with drinking water; 4. Enter the ash remover to remove ash (time does not exceed about 30 seconds); 5. Drinking water treatment - air drying (exposure to sunlight) or stopping air oxidation.

Cleaning process for aluminum wafers:

1. First, use a lot of cold water to clean the surface of the aluminum disc for dirt and dirt. Then, sprinkle detergent diluted with water on the top, wipe the surface of the aluminum disc with a thin cloth, and then use a lot of cold water to clean the surface after cleaning, flushing away all the dirt on the surface of the aluminum disc.

2. Check the appearance of the aluminum wafer to see if it is clean. For those that have not been cleaned, it is important to stop sorting and ensure that everything is clean. Then, rinse off all the detergent with cold water.

3. In addition, it should be noted that there is no need to organize aluminum wafers with high temperatures. Due to the rapid evaporation of water, it can cause damage to the surface of the spray paint. When using cleaning agents, it is necessary to choose a neutral cleaning agent, otherwise it will corrode the surface of the aluminum wafers.